Forklift Attachments

At Whitney Engineering we have been supplying a wide range of forklift attachments for all of your handling requirements for over 25 years. We hold a large stock of attachments which we can ship nationwide at short notice.

Our most popular forklift attachment is the Whitney Forklift Tipping Skip (WTS). These high quality low cost versatile skips are used in a wide variety of different environments which include: building sites, factories, recycling plants and warehouses. They are the ideal tool to help maintain a clean, efficient and safe site. These skips come complete with reinforced top edges, tip handle with safety catch and an automatic reset feature. We stock three different sizes, 750, 1250 and 1750 litres. They can also be manufactured to bespoke sizes along with many different optional extras which include: 3 way feet for side forklift entry, 2 part hinged lids, lifting lugs (tested to a SWL of 2T and supplied with certification to comply with LOLER regulations), and rubber lined for sites with noise restrictions plus many more. All of our skips are CE marked and come complete with a Certificate of Thorough Examination.

In addition to our standard WTS tipping skips we also supply a heavy duty tipping skip (HDI). These robust tipping skips come complete with a reinforced frame and a heavy duty safety chain. The 750L and upward models are made from 5mm steel.

For the ultimate in driver safety, we have designed the Whitney Auto Tipping and Auto Locking Forklift Tipping Skip (ATF). With no driver intervention required to secure the tipping skip to the forks or for the tipping process. The driver simply fully engages the forks through the fork pockets then lifts the skip up off the ground to engage the automatic fork lock. To activate the auto tip simply lower the skip onto the receiving container and the skip will automatically tip. It couldn't be any easier!

We have also designed a skip to be used exclusively with telehandlers. The Whitney TeletubTM Telehandler Skip is suitable for all makes of telehandler with 125mm wide forks. The TeletubTM automatically locks and unlocks from behind the heel so the driver always stays safely within the cab. The tipping is also controlled from within the cab and as the skip does not pivot then this means there is no shock to damage the telehandler.

For a versatile concrete skip which can be lifted by telehandler, forklift and crane we have the Secatol BSB Concrete Skip. This 500 litre skip has been designed to have a low loading height of just 730mm so that it can be filled from a site concrete mixer. It has a lever operated gate and comes with a 1 metre 200mm diameter hose as standard however we can also supply with 90, 150 & 250mm diameter hoses if required.

If a larger discharge gate is required then we have the Secatol ELEV type skip. These skips have a large rectangular gate which can either be lever or hand wheel operated for more control whilst pouring the concrete. They can be lifted by either forklift or crane and are designed to be lower in height than other skips of the same capacity.

We also supply other forklift attachments such as fork mounted hooks, fork extensions, forklift platforms, fork mounted snow ploughs and scoops.